How to choose a screw or bolt: material, thread and joint requirements
The correct fastener meets the requirements of a particular joint. Diameter, appearance or a request for a strong bolt does not provide a complete specification. Establish the function and technical requirements first, then check the thread, length, material and assembly process.
1. Define the joint's function
A cover fixing, adjustment mechanism and engineered machine joint may need different fasteners. Determine whether the part engages a nut, an existing tapped hole or forms its own thread. For replacement work, consult the machine parts list. For a new design, the responsible engineer defines the requirements.
2. Match the thread system and pitch
A nut or tapped hole requires matching thread system, diameter and pitch. Confirm whether the specified metric thread is coarse or fine. A similar inch size is not a substitute. See our metric and inch thread guide.
Choose screws for wood, sheet metal or plastics from their stated application and installation instructions. Do not transfer the rules for one fastener family to another.
3. Check length and effective thread engagement
Overall bolt length is different from the length of engaged full threads. A blind hole also has a limited available depth: a long bolt may bottom out before clamping the parts.
There is no universal requirement to engage five or six bolt diameters. Engagement in a tapped component depends on the component material strength, bolt and thread geometry. Bossard's engagement guide describes the relevant selection factors. Apply reference tables only within their intended scope.
4. Specify property class, material and coating separately
Class 8.8 does not establish suitability for every structural application or repair. Use the specified class and have alternatives assessed. Our separate property class article explains the markings.
Stainless steel is not automatically a replacement for a carbon steel bolt of a specified class. Record the required material and mechanical properties rather than ordering simply by appearance.
5. Describe the service environment
Moisture, chlorides, process chemicals, temperature and crevice conditions affect material selection. Zinc coating and A2 or A4 designations do not guarantee durability in every environment. Stainless steel can also corrode, as explained in Bossard's corrosion guidance.
Tell the supplier where the joint operates. For chemical exposure, identify the medium and conditions rather than using only a general description such as acid resistant.
6. Verify tool access and tightening
Match the head and drive to the available axial and lateral access, tool clearance and service requirements. No drive is best for every application.
Use an approved tightening procedure. Friction and surface condition affect the result; do not transfer torque settings between different coatings or lubrication conditions without assessment. Bossard explains tightening uncertainty.
Information for the enquiry
- Standard or complete product description and application.
- Diameter, pitch, overall and threaded length.
- Property class, material and coating.
- Head, drive and mating components.
- Assembly and documentation requirements, quantity and deadline.
Send your specification to Śrub-Top to check available variants. Engineered joints must be assessed against their technical requirements.
Reviewed and updated on 12 October 2026.
