Śrub-Top

Search products

Expert Knowledge

Knowledge Base and Industry News

Retaining ring beside a grooved shaft and installation pliers — illustration

Retaining ring coming out of its groove? What to check before replacement

A new retaining ring cannot repair a worn groove. Check ring type, groove geometry and installation before replacing it again.

Bolt beside a caliper and thread pitch gauge on a technical workbench — illustration

Unknown fastener: photographs and measurements for a supplier enquiry

Learn how to photograph an unknown fastener, record measurements and describe its application for a useful supplier enquiry.

Round and hexagonal rivet nuts beside thin sheet metal and a hollow profile — illustration

Choosing a rivet nut for thin sheet metal and closed profiles

Thread size alone is not enough to choose a rivet nut. Check grip range, mounting hole, body, flange and setting tool.

Thin cutting discs beside a steel profile and sheet metal — illustration

How to choose a metal cutting disc: material, dimensions and speed

Check the material, disc diameter, mounting hole and speed rating before selecting a cutting disc for your workshop.

Three hex bolts marked with property classes 8.8, 10.9 and 12.9 — illustration

Bolt property classes 8.8, 10.9 and 12.9: what they mean and how to choose

Learn what bolt head markings mean and what to check before choosing or changing a bolt property class in a machine joint.

Self-drilling screw illustrating fastener selection for sheet metal and steel profiles

How to choose a self-drilling screw for sheet metal and steel profiles

Diameter and length alone are not enough when choosing a self-drilling screw. Check its drilling capacity, clamping thickness range and installation requirements.

Featured image for the metric and inch thread guide

Metric or inch threads? How to identify the correct system

Compare metric, UNC/UNF and pipe threads. Understand diameter, pitch and TPI, and why similar appearance does not establish compatibility.

Screws and bolts with different heads, a nut and a washer on an anthracite background — illustration

How to choose a screw or bolt: material, thread and joint requirements

Start with the joint function and specification, then check the thread, engagement length, property class, coating and tool access.