Śrub-Top

Search products

Choosing a rivet nut for thin sheet metal and closed profiles

Round and hexagonal rivet nuts beside thin sheet metal and a hollow profile — illustration

A rivet nut creates a threaded fastening point in thin material with installation from one side. It is useful in enclosures and closed profiles where a conventional nut is difficult to reach. Selection requires more than an M6 thread: match the grip range, mounting hole, body and installation process.

How does a rivet nut work?

The nut enters a prepared hole and a setting tool deforms its body to form a closing head behind the material. The internal thread then accepts the fixing screw. GESIPA explains the process and product variants.

One-sided installation still requires sufficient space behind the sheet. Check the mounting area and test a sample if the profile is cramped.

Grip range must match the material thickness

Measure the thickness at the installation point and compare it with the selected product's grip range. Two nuts with the same thread may have different lengths and thickness ranges.

Do not select by overall body length alone. Product tables list thread, grip range and mounting hole separately, as illustrated by GESIPA's dimensional catalogue. Values apply to specific products rather than every similar-looking rivet nut.

Thread size is not the mounting hole diameter

M6 identifies the mating screw thread, not a 6 mm installation hole. Obtain the hole size and tolerance from the selected product documentation. Also confirm whether the body requires a round or a shaped hole.

Record the rivet nut and its hole specification together when preparing production. Test using the intended material and hole geometry before ordering the series.

Body, flange and material

Manufacturers offer round, knurled and hexagonal bodies and different flange styles. Match these to the hole and mating surface. GESIPA's standard range illustrates the range of features beyond thread size.

Include the sheet material, required rivet nut material and service environment in the enquiry. Appearance or surface colour alone does not establish material suitability.

Setting tool and installation trial

Confirm tool compatibility with the thread size, material and rivet nut type. Follow the manufacturer's settings and installation sequence. An instruction to simply pull harder is not a repeatable process.

For a trial, record the product designation, material thickness, hole and setting tool. Inspect the installed nut and check the intended screw assembly against the design requirements. An ability to screw the part together is not proof of the connection's load capacity.

What should the enquiry contain?

  • Thread size and mating component.
  • Sheet or profile wall thickness and material.
  • Mounting area drawing and hole shape and dimensions.
  • Flange, clearance and environmental requirements.
  • Available setting tool, quantity and deadline.

Photograph a sample from the side and flange face. For repeat production, retain the agreed designation and verify any variant change against the process.

Frequently asked questions

Does every M6 rivet nut fit the same hole?

No. Hole requirements depend on the particular body and product design.

Is rear access needed?

Installation is from one side, but adequate clearance is needed behind the material.

Can aluminium replace steel?

Similar dimensions are not sufficient. Verify the joint, material and product performance requirements.

Send Śrub-Top the thickness, thread size and joint sketch to narrow down available options.

The generated illustration does not replace a product data sheet or setting instructions.